The whole Veken range in one place · fountains, showers, storage, travel and desks
11.8 in High-Pressure Shower Combo — Starlight

11.8 in High-Pressure Shower Combo — Starlight

A dual-spray system pairing an eleven-point-eight inch overhead plate with an adjustable extension arm and a multi-setting handheld wand in the Starlight finish.

$66.99 ★★★★★ 4.6 · 2,472 owner ratings
In stockStandard

A dual-spray system pairing an eleven-point-eight inch overhead plate with an adjustable extension arm and a multi-setting handheld wand in the Starlight finish.

  • Broad Overhead Coverage
  • Articulated Extension Arm
  • Three Wand Spray Modes
  • Tool-Free Assembly
  • Sealed Joint Construction
View deal
Other colours in this model
ChromeChromeMatte BlackMatte BlackBrushed NickelBrushed Nickel

Living with the 11.8 in High-Pressure Shower Combo — Starlight

Standard overhead pipes often leave taller users crouching under low fittings or struggling with narrow spray patterns that barely cover the shoulders. This dual setup addresses reach and position directly by combining a broad eleven-point-eight inch rainfall head with an articulated fifteen inch arm that extends out up to sixteen inches and lifts the main plate an extra five inches above the existing outlet.

Water flow splits between the overhead plate and a secondary handheld wand equipped with rain, massage, and mist modes. The hardware assembles by hand onto existing standard shower plumbing, using internal seals to prevent joint drips while letting users pivot the primary plate or direct the wand toward corners, pets, or targeted rinsing tasks.

What makes it work

Broad Overhead Coverage

The eleven-point-eight inch rainfall faceplate delivers wide, continuous water distribution across the shoulders and body.

Articulated Extension Arm

A fifteen inch arm extends outward up to sixteen inches and raises the overhead plate by five inches while maintaining vertical alignment.

Three Wand Spray Modes

The handheld wand switches between dedicated rain, massage, and mist settings for rinsing hair, washing pets, or cleaning the stall.

Tool-Free Assembly

Threaded joints connect directly to standard supply pipes by hand without requiring specialized plumbing tools.

Sealed Joint Construction

Internal engineering stops drips at connection points across the diverter, extension arm, and hose attachments.

Owner’s notes

  1. Thread each joint by hand until snug to seat the internal seals properly without over-torquing the connections.
  2. Adjust the extension arm wing nuts to secure the primary plate in a level position before running high-pressure water.
  3. Switch between the three wand modes by clicking the selector ring firmly into each defined detent.

More from Shower Heads