The whole Veken range in one place · fountains, showers, storage, travel and desks
All-Metal Shower System — Oil Rubbed Bronze

All-Metal Shower System — Oil Rubbed Bronze

An all-metal dual fixture in oil rubbed bronze, pairing a ten-inch square overhead spray face with a slide-bar handheld wand for full enclosure coverage.

$179.99 ★★★★★ 4.5 · 4,781 owner ratings
In stock10 in

An all-metal dual fixture in oil rubbed bronze, pairing a ten-inch square overhead spray face with a slide-bar handheld wand for full enclosure coverage.

  • Ten-inch overhead square face
  • Concurrent dual spray routing
  • Thirteen-inch adjustable slide bar
  • Handheld power wash jet
  • Fifteen-inch metal extension arm
View deal

Living with the All-Metal Shower System — Oil Rubbed Bronze

Darker bathroom hardware demands solid construction, and this all-metal configuration replaces plastic fittings with rigid metal parts throughout the extension and mounting hardware. The overhead ten-inch square rain fixture supplies broad water coverage, while the secondary handheld sprayer docks onto a thirteen-inch slide bar to accommodate different user heights or seated bathing routines.

A fifteen-inch extension arm positions the overhead plate away from the wall to establish a vertical drop. Water can route to either outlet independently or feed both heads simultaneously. For cleaning tasks, a dedicated power jet mode on the wand directs a concentrated stream across tile grout, glass enclosures, and tub basins using the sixty-inch flexible hose.

What makes it work

Ten-inch overhead square face

Discharges a broad, steady rainfall pattern that covers the shoulders without requiring awkward repositioning.

Concurrent dual spray routing

Diverter hardware permits running the overhead rain face and the handheld sprayer together with balanced output.

Thirteen-inch adjustable slide bar

Secures the handheld wand at custom heights along the wall for seated washing, children, or rinsing down pets.

Handheld power wash jet

Concentrates water pressure into a focused stream to scour soap scum off enclosure walls and corner grout lines.

Fifteen-inch metal extension arm

Projects the main rain head out into the stall to achieve a natural overhead angle without adhesive mounts.

Owner’s notes

  1. Wrap the included plumbing tape clockwise around all threaded pipe ends before tightening connections with the supplied wrench.
  2. Verify that an internal rubber washer sits squarely inside each hose connection before threading to prevent joint weeping.
  3. Wipe the oil rubbed bronze surfaces with a damp, soft cloth rather than abrasive scouring pads to protect the dark finish.

More from Shower Heads